Installed with bar feeder
Available for most of in-market bar feeder,
easy set up for different bar material with
no bother to change program and parameter.
Installed with customized auto loading & unloading device
Quick loading & unloading system, manual or auto feeding,are developed for A30/40 to maximum production rate. Especially, for parts that has short cycle time as much as 5 seconds. Such a system is suitable for part diameter smaller than 30mm.They also feature high ratio for performance to cost.
Equipper with gantry robot
Gantry robot performs loading and unloading partts in diameter up to 42mm.
It is particular suitable for finish part that demands no scrape and spot. This robot
is compact and totally integrated with delivery system that is available once
required. It is easy for changeover,too.
4-joint robot installation
An independent 4-joint robot and tray system can apply to an A30/40 for continuous production. One robot can serve two machines. However, the robot figure and tray might need to be
replaced with appropriate one individually for changeover.