Equipped with 12-position power turret and Cs,A30/42TP is a real
turning center. The powerful coolant system removes chips efficiently
with 20kg/cm² pressure coolant. Overhead part catcher delivers finish
parts outside of the machine.
| Item | A30TP | A42TP | Unit | ||
| Capacity | Swing over slide | 400 | mm | ||
| Swing over table | 200 | mm | |||
| Max. bat dia | 30 | 42 | mm | ||
| Max. chuck dia | 5" | 6" | inch | ||
| Spindle | Spindle type | Belt type | |||
| Max. spindle speed | 8000rpm | 6000rpm | min-1 | ||
| Motor | 5.5/3.7 | 7.5/5.5 | kw | ||
| Lubrication / Cooling | Grease | ||||
| Live Tool | Transmission | Gear | |||
| Max Speed | 6000 rpm | min-1 | |||
| Shank size | VDI20/ER16/ER20 | ||||
| Motor | 2.2 | kw | |||
| Tool Post | Type | 12-position power turret VDI20 | |||
| Max. tool shank | 16/Ø20 | mm | |||
| Slide | Max traverse X , Z | 400 , 250 | mm | ||
| Rapid Traverse X , Z | 25m | min-1 | |||
| Lubrication | Ball screw X ,Z
(0.2-0.3Mpa)
|
Oil Air | |||
| Ball screw Y | Oil | ||||
| Linear Guide | Oil | ||||
| Coolant | Motor | 0.35 | kw | ||
| High pressure Motor | 0.375 | kw | |||
| Capacity | 180 | L | |||
| Others | Pneumatic source(0.5-0.6Mpa) | 150 | L/min | ||
| Power requirement | 13 | 15 | kva | ||
| Machine weight | 2150 | 2220 | kg | ||