8-position turret in conjunction with gang tooling provide more
cutting options and improve chip flow when used with coolant
of 20kg/cm² pressure. Overhead type of part catcher is
specifically design to deliver finish parts out of machine in neat.
| Item | A30T | A42T | Unit | ||
| Capacity | Swing over slide | 380 | mm | ||
| Swing over table | 160 | mm | |||
| Max. bar dia | 30 | 42 | mm | ||
| Max. chuck dia | 5" | 6" | inch | ||
| Spindle | Spindle type | Belt type | |||
| Max. spindle speed | 8000rpm | 6000rpm | min-1 | ||
| Motor | 5.5/3.7 | 7.5/5.5 | kw | ||
| Lubrication / Cooling | Grease | ||||
| Tool Post | Type | 8-position Turret | |||
| Max. tool shank | 20/Ø25 | mm | |||
| Slide | Max. traverse X , Z | 400 , 250 | mm | ||
| Rapid Traverse X , Z | 30m | min-1 | |||
| Lubrication | Ball screw X,Z
(0.2-0.3Mpa)
|
Oil Air | |||
| Ball screw Y | Oil | ||||
| Linear Guide | Oil | ||||
| Coolant | Motor | 0.35 | kw | ||
| High pressure Motor | 0.375 | kw | |||
| Capacity | 180 | L | |||
| Others | Pneumatic source(0.5-0.6Mpa) | 150 | L/min | ||
| Power requirement | 12 | 14 | kva | ||
| Machine weight | 2080 | 2150 | kg | ||